DIY speakers amplifiers design loudspeaker design amplifier DIY DIY DIY super high quality real Hi-Fi studio quality home studio recording engineer enjoy feast revel audiophile extra natural sound detailed open unmasked perfect sound music lover lovers studio monitors home cinema entertainments
Loudspeaker kit HSV-1e

 
      
 The original speaker kit with the woofer that the VH-1 was designed for.

The HSV-1e kit consists of two woofers, twoo tweeters, two high quality filter capacitors, two speaker terminals, two self-resetting fuses and 10 m loudspeaker cable. That is, the electronics for two VH-1 loudspeakers.
(The inductance of the woofer coil gives a 3 kHz roll-off, so no filter coil is needed.
)
The woofer (bass driver) has a structured polypropylene membrane with high stability. The Qts, membrane area and resonance frequency matches the VH-1 box perfectly. (No wonder, the box was designed using exactly these drivers.)
The tweeters have a high quality silk dome with linear frequency response and low distortion.
The filter capacitor is a low distortion high quality polypropylene capacitor.
If a crescendo in the music goes beyond what the speakers can handle, the fuses will lower the volume and when the volume from the amplifier goes down again, the fuses automatically reset. *

Music power max 60 W per channel, RMS 30 W. However 30 W gives 106 dB SPL, which is enough to damage your hearing, and you get the impression of even more volume due to second harmonics from the horn. The VH-1 can therefore "fill" even very large rooms.

Very important during the covid-19 pandemic:
We cannot, unfortunately, deliver our products to all coutries and regions with our normal shipping company, PostNord. They use storage on passenger airlines to ship packages, and as many passenger flights are cancelled during the pandemic, they cannot deliver packages to many countries until the airline traffic becomes normal again.
There is a list of coutries to which they can ship packages, by air, boat, train and trucks. This, however, also affects transportation time a lot. We sent a package to New York, U.S. and the normal shipping time is 4-6 workdays, but it took 1½ months to reach our customer, and a package to southern France (normally 3 workdays) took three weeks.
So, here is the list to which package can be sent by PostNord, but be prepared to wait a while:
https://www.postnord.se/en/about-us/how-the-coronavirus-is-affecting-our-deliveries
If your country is not in the list, and we still handle the package over to PostNord, they will keep it in storage and ship it when airlines "open up". And that can take quite some time.

There is an option: We can use DHL for shipping, they use their own airplanes and can ship to most parts of the world without problems.
However their shipping costs are much higher. So, if you want to know the total cost incl shipping by DHL, contact us by
email and we will check with DHL and tell you the total cost.  
The prices incl shipping on our site only apply when shipping by PostNord..

The complete stereo kit is exported to most countries in the world, and the cost including shipping is as follows:


Price incl shipping to your country, payment via PayPal:

EU countries, VAT included: 2125 SEK *
Norway, Iceland, Faroe Islands, Greenland, Åland: 1805 SEK
Europe 1, see
list below: 1805 SEK
Europe 2, see
list below: 1815 SEK
USA, Canada: 2005 SEK**
Rest of the world where PayPal works: 2025 SEK***
Shipping is included, these figures are the total cost you pay to us.

Approximate cost in other currencies, exchange rate as of 2018-09-13, 12:30 CET:
*) 204 Euro, 181 GBP, 1516 DKK
**) 223 USD, 290 CAD
***) 314 AUD, 344 NZD


Europe I

French Guyana, Guadeloupe, Martinique, Réunion, Mayotte, Gibraltar, Isle of Man, Channel islands, Monaco, Montenegro, San Marino, Vatikan city

Europe II

Albania, Andorra, Bosnien-Hercegovina, Georgia, Kosovo, Kroatia, Macedonia, Moldava, Russia, Switzerland, Serbia, Ukraina, Belarus


Important: Wait for the kit, do not cut any wood parts in advance.
The dimensions shown in the online documents are incorrect.
The HSV-1e kit includes drawing and instructions with the correct dimensions.


Order by email, click here
For shipping, our shipping company needs your name, full address and phone number.

We will reply with an estimated delivery time, and if you agree, a PayPal Money Request.
PayPal accepts Visa, MasterCard, Discover, and American Express (and, of course, PayPal balance).


*) All fuses have a certain delay, usually a second or so, before they switch off.
One of our customers had a 2 x 400 W (!) amplifier. At a party a "friend" pulled a prank on him. With the amplifier turned off, the "friend" set the volume to maximum. When the amplifer was turned on the high power pulse immediately destroyed the woofers.
If you overload a loudspeaker like that it is damaged within milliseconds, so the fuses will not be quick enough.
But if the music is slowly turned up (by you or when there is a crescendo in the music) they do their work OK.
So even if the loudspeakers are protected by fuses, use common sense.
Also, even if a loudspeaker has enough power capability for the amplifier, an overdriven amplifier produces squarewave signals with high energy high frequencies that can destroy the tweeters. So:
Never switch on an amplifier with a high volume setting. Not even as a joke...